TAZ: Difference between revisions
add links to firmware (can't figure out how to upload the files to the wiki) |
|||
| Line 16: | Line 16: | ||
=== SetUp === | === SetUp === | ||
=== Firmware === | |||
if you screw up the firmware with a weird upload or whatever, here's the factory hex file (which can be flashed using cura-lulzbot) | |||
https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex | |||
source: | |||
http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2 | |||
=== 3D Models === | === 3D Models === | ||
Revision as of 07:56, 22 February 2018
Sudoroom has a TAZ3 3D printer. We won it in the LulzBot 2014 printer giveaway! It can print from an SD card, with many materials:
- PLA
- ABS
- Wood
- Nylon
We are still getting familiar with this machine, but very excited to hack on it!
Manual
SetUp
Firmware
if you screw up the firmware with a weird upload or whatever, here's the factory hex file (which can be flashed using cura-lulzbot) https://devel.lulzbot.com/TAZ/3.1/software/2014Q2/firmware/marlin/Marlin_taz3.1.cpp.hex
source: http://download.lulzbot.com/TAZ/3.1/software/current/firmware/marlin_taz/marlin_taz.tar.bz2
3D Models
Links
- How to print your sketchup model on a lulzbot taz 3d printer nice clear how-to from open ecology
- SudoKit/IndividualKits tangible kit project around 3D printing in the works :)