Artemis: Difference between revisions
| (2 intermediate revisions by the same user not shown) | |||
| Line 4: | Line 4: | ||
'''Printer Name:''' Flashforge ARtemis | '''Printer Name:''' Flashforge ARtemis | ||
'''Preferred Slicer:''' | '''Preferred Slicer:''' FlashPrint | ||
'''Nozzle:''' 0.4mm | '''Nozzle:''' 0.4mm | ||
| Line 30: | Line 30: | ||
* telnet in, kill the proprietary application that talks to the motion controller, and run <code>nc -l -p 1200 < /dev/tty/S2 > /dev/tty/S2</code> | * telnet in, kill the proprietary application that talks to the motion controller, and run <code>nc -l -p 1200 < /dev/tty/S2 > /dev/tty/S2</code> | ||
* then on another computer, run <code>socat something something 100.64.64.158 port 1200 /dev/virtualSerialport</code> to create a serial port that actually just goes through the local network to the motion controller in this printer, and control it using pronterface or ideally octoprint running on the laser cutter computer | * then on another computer, run <code>socat something something 100.64.64.158 port 1200 /dev/virtualSerialport</code> to create a serial port that actually just goes through the local network to the motion controller in this printer, and control it using pronterface or ideally octoprint running on the laser cutter computer | ||
* Try fixing this Python script to use OrcaSlicer to export required .GX file format: https://github.com/urself25/Orca_Gcode_to_Gx | |||
==Documentation== | ==Documentation== | ||
| Line 35: | Line 36: | ||
==Printing Tips== | ==Printing Tips== | ||
Flashprint default settings prints a big raft, and seems to be necessary for a good print. | |||
FlashForge Studio does NOT support this printer AFAIK. | |||
==Maintenance Log== | ==Maintenance Log== | ||
* Telnet enabled 5/31/26 | * Telnet enabled 5/31/26 | ||